Power Cords and Adapters

Everest Integrated DC Cord System Mobile Adapter

Mobile DC power cord converter is used with AEIOMed Everest Integrated CPAP System. CPAP, heated humidifier and/or battery mobile converter plugs into cigarette lighter.

View Rating:

Read Product Details

Mabis DC Auto Adapter

12 Volt DC Auto Adapter for the Mabis Mist II hand held ultrasonic nebulizer

D.C. Power Cord (Nellcor Puritan Bennett)

D.C. Power Cord for the Puritan Bennett GoodKnight 420E, 420G and 420S CPAPs

View Rating:

Car Adapter Power Cord (Nellcor Puritan Bennett)

Car Power Adapter Cord for the Puritan Bennett GoodKnight 420E, 420G and 420S CPAPs
Plugs into the car cigarette lighter fixture

Puritan Bennett 420 Series Power Adapter

Power Supply for Puritan Bennett 420G, 420S and 420E CPAP
< Listed for reference only >

ResMed™ DC Converter for the S9

Unlike the previous DC converters, this product does support the use of heated humidification while running off either a 12V or 24V DC power source. It will automatically switch for either DC power source.

Read Product Details

ResMed™ DC-12 Converter

Resmed DC-12 Converter for S8 machines.
Operate a ResMed S8 device from a 12V or 24V DC power source in a car, boat, or other vehicle equipped with a suitable battery.
Output Voltage is 12V DC, 2.5A maximum

View Rating:

Shielded DC Cord System

The Shielded DC Cord System is required to operate Respironics CPAP and BiPAP Systems from a freestanding 12 volt battery.
Please see Patient Instructions for information relating to your specific unit.

View Rating:

Read Product Details

AC Power Cord, REMstar Plus

Power Cord with C7 End
For use with REMstar® Pro, REMstar® Plus and REMstar® Auto

View Rating:

DC Battery Adapter Cable

DC Battery Adapter Cable for use with Respironic CPAPs. The DC Battery Adapter Cable, when connected to either the DC Interface Module or the DC Cord, enables Respironics’ CPAP and Bi-level Systems to be operated from a 12 VDC deep cycle marine-type battery.

Read Product Details

Respironics Portable Battery Pack

Portable battery pack from Respironics. Package includes: battery with carrying case, battery charger, user guide, shielded DC power cord and fuses.
< Item is on indefinite back-order - Not currently available from the factory >

View Rating:

Read Product Details

DC Interface Module

12VDC Interface Module For use with all BiPAPs or BiPAP S/T, REMstar, REMstar Lite (pressure >= 11cm).
The AC to DC Inverter allows any CPAP, BiPAP, VPAP or Bilevel device to run from a 12 volt cigarette lighter socket in a car.

DC Power Adapter Kit

DC Power Adapter Kit. Includes DC power adapter, Battery adapter and auto adapter. The DC Power Adapter and accessories allow you to operate many Respironics BiPAP systems from a 12 VDC power source. Using the included Auto Adapter, the Power Adapter plugs into a standard wehicle cigarette lighter socket. Using the Battery Adapter Cable, it can be connected directly to a free-standing 12 VDC battery. You need a DC Interface Module (F552097) to plug in both the machine and humidifier.

DC Interface System

Respironics DC Adapter Cord

Car cigarette lighter 12 Volt DC power cord for use with Respironics M series CPAP devices.

View Rating: